How It Works

 

Our foot operated faucet system installs on any new or existing sink that has standard plumbing connections. The foot pedals fit in the toe space under the sink cabinet and use power from the garbage disposal outlet or dishwasher outlet. The Control Box has an outlet where your existing garbage disposal cord plugs in. Foot Faucet valves are installed between the water shutoffs and your existing faucet. The AC wall adapter regulates power down to low voltage DC current for safe use at the foot pedals. The regular AC plug still runs the garbage disposal, but this power is isolated from the foot pedals, so risk of electric shock is removed.

 

 


       Click for demo

 


Click Image for video

 

Click here to download installation manual           

After installing the Foot Faucet, turn on the faucet hot and cold knobs (or single lever) to warm, now you're ready to use the Foot Faucet controls. The center two pedals operate hot and cold water, the water flow will stay on as long as you push on the pedal, pressing both pedals will turn on both valves, for warm water. Pressing the Hot Latch pedal once will hold both the hot and cold water on until a tap to the Hot Water pedal turns them off. The garbage disposal pedal turns on the garbage disposal and the cold water at the same time.

For the times when you are bare foot, the Foot Faucet has Patent Pending touch sensor technology that operates the hot and cold water by just touching the pedal, no force required. The garbage disposal pedal does not have the touch sensor feature, that pedal must be pushed to get it to activate.

 

Foot Faucet Size

The Foot Faucet fits in any toe space that has a flat spot to mount to that is 2" x10". The length of the Foot Faucet levers is specified at time of order. We have three standard lengths, let us know if you need a special length.